清污机特点

Characteristics of cleaning machine

    ● 清污机的桥架式导轨设计使工作平面干净整洁，使工作平台的有效工作区得到优化。

The design of the bridge type guide rail of the cleaning machine makes the working plane clean and tidy, and optimizes the effective working area of the working platform.

    ● 支撑柱的安装位置可随现场条件灵活定位以适应任何场地条件。

The installation position of the supporting column can be flexibly positioned with the site conditions to suit any site conditions.

    ● 水下无浸泡部件，因此提高了设备的可靠性，并减少了设备维护。

• no soaking parts under water, thus improving the reliability of equipment and reducing equipment maintenance.

    ● 维护周期短，每年两次。

The maintenance period is short, two times a year.

    ● 所有传动单元寿命周期长。

All transmission units have a long life cycle.

    ● 低噪音运行适合城市场地。

Low noise operation is suitable for city sites.

    ● 工作负荷在250公斤到3000公斤之间（指单爪清污重量）。

The working load is between 250 kg and 3000 kg.

    ● 栅条间距在12mm到200mm(或以上)的范围。

The grid spacing is between 12mm and 200mm (or above).

    ● 清污深度可达50米。

The depth of cleaning can reach 50 meters.

    ● 垂直的栅条也可以被清理。

• vertical bars can also be cleaned.

    ● 抓爪的两侧是开放式的，可以把长树干这样的污物清除，同时可以很轻易的清除木头，油桶和塑料布等污物。

The two sides of the gripper are open to remove dirt such as long trunks and easily remove dirt such as wood, oil drums and plastic cloth.

    ● 该系统不需要反冲水槽或者是栅渣输送单元。清污抓爪可直接将污物运到排放区。

The system does not need recoil flume or grate conveying unit. The dirt claw can be transported directly to the discharge area.

    ● 可考虑多个排放区。

• multiple emission zones can be considered.

    ● 导轨可做成曲轨形式，完成到指定地点的污物倾倒。

The guide rail can be made into a curved rail to complete the dumping at the designated place.

    ● 运行速度在每分钟10米和60米之间的范围，这样可以减少在较宽格栅区的整体清污循环时间。

The operating speed is between 10 and 60 meters per minute, which can reduce the overall cleaning cycle time in a wider grille area.

    ● 可通过手动控制、时间控制、液位差控制，实现全自动操作。同时，还可以实现远程监测。

By manual control, time control and level difference control, automatic operation can be realized. At the same time, remote monitoring can also be realized.

    ● 还可通过手控摇柄实现人工操作。此功能特别适用于机器控制单元出现故障的情况下。

It can also be manually operated by hand crank handle. This function is especially suitable for the failure of the machine control unit.

    ● 耗电量低，节约能源，降低运行成本。

Low power consumption, energy saving and operating cost reduction.

    ● 结构设计符合环保要求。

The structural design meets the requirements of environmental protection.