清洗机操作规程

Rules of operation for cleaning machines

准备前奏

Prelude to preparation

检查管路系统有无漏气漏水的情况，如有这种情况，应通知维修人员修理。检查清洗液是否足够，如果不够，及时增加清洗液。先点动试车，然后空运转2-3分钟，检查传动系统（电动机、联轴节、减速器）和运输带的运动是否平稳，确聚氨酯软管 PVC软管 隔离墩模具 u型槽模具 护坡模具 pvc输送带 尼龙输送带 天津除甲醛 北京除甲醛 认一切正常后，方可进行生产。开启浮油排除装置（不带浮油排除装置除外）开始浮油排除，因此时水泵尚开启，水面平静，排油效果最好，待浮油基本排除后停止除油，排油污多克利用午休时间进行。

Check whether there is leakage or not in the pipeline system. If this happens, the maintenance personnel should be notified to repair it. Check whether the cleaning fluid is sufficient, if not, add the cleaning fluid in time. Start with the test run, then run empty for 2-3 minutes, check whether the movement of the transmission system (motor, coupling, reducer) and the conveyor belt is stable, and confirm that everything is normal before production. Open oil slick removal device (except without oil slick removal device) to start oil slick removal, so the water pump is still open, the water surface is calm, and the oil drainage effect is the best. After the oil slick is basically removed, the oil removal will stop, and the oil pollution will be removed by noon break time.