一、使用前的检查工作要到位
1、 The inspection before use should be in place
在安装之前要认真的检查清污机的各个零件是否带全。包括保险棘轮、螺栓等细小部件的检查。其次是要检查钢丝绳，看起缠绕得是否整齐。最后检查各个部件是否很好的连贯在一起。假山制作 不锈钢铸件 铝箔真空袋 七孔梅花管 hdpe硅芯管 液压钢坝 PVC软管 飞行激光打标机 沥青保温泵
Before installation, carefully check whether all parts of the cleaning machine are complete. Including the inspection of safety ratchet, bolt and other small parts. The second is to check the wire rope to see whether the winding is neat. Finally, check whether the components are well connected.
二、使用过程操作环境需安全
2、 The operating environment should be safe during use
第一步检查到位后这时候就可以启动机器进行运转了。在使用过程中，需要找一块平整、安全、干净的地面。确保设备平整与地面接触牢固。因为在操作过程中机器运转时候会产生很大的力量，若清污机与地面固定的不牢固就会发生机器倾斜、偏移的情况。
After the first step inspection is in place, the machine can be started for operation at this time. In the process of use, we need to find a flat, safe and clean ground. Ensure that the equipment is flat and firmly contacted with the ground. Because in the process of operation, the machine will produce a lot of force when it is running. If the cleaning machine is not fixed firmly with the ground, the machine will tilt and offset.