| 操作简单的清污机 |
| 添加时间：2021/7/14 10:20:41 浏览次数： |
| 一、使用前的检查工作要到位 1、 The inspection before use should be in place 在安装之前要认真的检查清污机的各个零件是否带全。包括保险棘轮、螺栓等细小部件的检查。其次是要检查钢丝绳，看起缠绕得是否整齐。最后检查各个部件是否很好的连贯在一起。假山制作 不锈钢铸件 铝箔真空袋 七孔梅花管 hdpe硅芯管 液压钢坝 PVC软管 飞行激光打标机 沥青保温泵 Before installation, carefully check whether all parts of the cleaning machine are complete. Including the inspection of safety ratchet, bolt and other small parts. The second is to check the wire rope to see whether the winding is neat. Finally, check whether the components are well connected. 二、使用过程操作环境需安全 2、 The operating environment should be safe during use 第一步检查到位后这时候就可以启动机器进行运转了。在使用过程中，需要找一块平整、安全、干净的地面。确保设备平整与地面接触牢固。因为在操作过程中机器运转时候会产生很大的力量，若清污机与地面固定的不牢固就会发生机器倾斜、偏移的情况。 After the first step inspection is in place, the machine can be started for operation at this time. In the process of use, we need to find a flat, safe and clean ground. Ensure that the equipment is flat and firmly contacted with the ground. Because in the process of operation, the machine will produce a lot of force when it is running. If the cleaning machine is not fixed firmly with the ground, the machine will tilt and offset. 三、设备运转工作人员需专心 3、 Equipment operation staff should be attentive 在设备运转的时候需要有专人看管，并且中途不得离开，要专心致志的观察清污机的工作情况，遇到故障问题要迅速处理。除此之外在工作的时候周围的人需要与清污机保持一定的距离，确保生命财产安全。 During the operation of the equipment, special personnel should be assigned to take care of it, and they should not leave halfway. They should concentrate on observing the working condition of the cleaning machine, and deal with the problems quickly. In addition, when working, people around need to keep a certain distance from the cleaner to ensure the safety of life and property. |
| 上一页 启闭机操作规程如下 |
| 下一页 螺杆式启闭机安装调试 |
Copyright © 技术支持：遨游网络