| 启闭机的载荷试验方法 |
| 添加时间：2022/2/24 14:13:37 浏览次数： |
| 启闭机的载荷试验方法 Load test method of hoist 1、启闭机操作人员必须掌握启闭机的结构、性能与操作方法，并有一定的机械知识，以确保机器的正常运转。 1. The operator of the hoist must master the structure, performance and operation method of the hoist, and have certain mechanical knowledge to ensure the normal operation of the machine. 2、操作前，对起闭机进行全面检查，个部位润滑情况是否良好，螺栓有无松动。 2. Before operation, conduct a comprehensive inspection on the hoist to see whether the lubrication of each part is good and whether the bolts are loose. 3、当启闭机运转时，操作人员不得离开现场，发现问题立即停机。 3. When the hoist is running, the operator shall not leave the site, and stop the machine immediately in case of any problem. 4、对机器进行维液压钢坝修时，必须清除载荷。 4. When repairing the machine, the load must be removed. 5、在使用时,需随时由注油孔注入润滑油，保定平面设计培训 保定室内设计培训 保定厨房排烟 雄安管道通风 要经常保持足够的润滑油，螺杆要定期清除油垢，涂护新油，以防锈蚀。 5. When in use, it is necessary to inject lubricating oil from the oil filling hole at any time, keep enough lubricating oil regularly, remove oil scale from the screw regularly, and apply new oil to prevent rust |
| 上一页 螺杆式启闭机在操作过程中应注意的事项： |
| 下一页 启闭机的载荷试验方法 |
Copyright © 技术支持：遨游网络