| 螺杆式启闭机的使用保养 |
| 添加时间：2019/10/15 15:48:22 浏览次数： |
| 螺杆式启闭机的使用保养 Use and Maintenance of Screw Hoist 1.操作人员必须掌握启闭机的结构、性能与操作方法，并有一定的机械知识，以确保机器的正常运转。 1. Operators must master the structure, performance and operation method of the hoist, and have some mechanical knowledge to ensure the normal operation of the machine. 2.操作前，对启闭机进行全面检查，各部位润滑情况是否良好，螺栓有无松动。电动启闭时检查电源线路是否接通，开关是否良好。 2. Before operation, check the hoist thoroughly. Whether the lubrication of each part is good or not, whether the bolt is loose or not. Check whether the power supply line is connected and the switch is good when the electric power is on or off. 3.电动运转时，操作人员不得离开现场，发现问题立即停机。 3. Operators are not allowed to leave the site when electric power is running, and stop immediately when problems are found. 4.启闭机维修时，必须清除载荷。 4. When the hoist is repaired, the load must be cleared. 5.在使用时，需随时由注油孔注入润滑油，要经常保持足够的润滑油，螺杆要定期清除油垢，涂护新油，以防锈蚀。 5. When in use, it is necessary to inject lubricating oil into the injection hole at any time, to keep enough lubricating oil regularly, screw should regularly remove grease scale and coat new oil to prevent rust. |
| 上一页 保养渠道闸门时要留意的事宜 |
| 下一页 螺杆启闭机调试方法及注意事项 |
Copyright © 技术支持：遨游网络