| 保养渠道闸门时要留意的事宜 |
| 添加时间：2019/10/30 13:52:57 浏览次数： |
| 保养渠道闸门时要留意的事宜： Matters to be paid attention to when maintaining the channel gate: 1.门页，停水清理，定形，侧轮，弧门边油查验，工作员应立即注意行人，穿防护鞋，然后非常当心; 1. Check the door leaf, stop water, clean up, shape, side wheel and oil around the arc door. The staff should pay attention to the pedestrians immediately, wear protective shoes, and then be very careful; 2.在门槽体工作中，要有避免小工具，在救生对策中掉入通道槽体，以防产生钢闸门卡死; 2. During the operation of the gate slot, small tools shall be avoided to fall into the channel slot in the lifesaving countermeasures to prevent the steel gate from being stuck; 3.工作中期内的钢闸门或慢速度孔应由专职人员承担; 3. The steel gate or slow speed hole in the middle of work shall be undertaken by full-time personnel; 4.门的转动全过程中不容许润化镀锌钢丝绳; 4. It is not allowed to moisten galvanized steel wire rope during the whole process of door rotation; 5.工作员在工作中期内应共同指挥，融洽，以防出現，挤压成型，辗压手指头。 5. In the middle of the work, the staff shall command and coordinate with each other to prevent the occurrence, extrusion and finger rolling. |
| 上一页 渠道闸门广泛应用 |
| 下一页 螺杆式启闭机的使用保养 |
Copyright © 技术支持：遨游网络